Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert B | 8 mm | |
| Thickness of the insert S | 3.6 mm | |
| Length of cutting insert L | 8 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 8 mm | |
| Height of cutting edge | 3.64 mm | |
| Diameter of the cutting insert d | 8 mm | |
| Corner radius R | 0.4 mm | |
| Corner chamfer length C | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 17 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 17 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | SOMT 083604 PDER | |
| Type of chip breaker | PP | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Tool application group | PDER | |
| Cutting media, manufacturers designation | HB7630 | |
| Coating | TiAlSiN | |
| Grade | HB7630 | |
| Insert thickness T | 3.6 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SO0836043R | |
| Interface coding for insert according to ISO TS 13399-60 | SO0836043R | |
| Insert designation | SOMT 083604 PDER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | Stainless steel (INOX); stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 0 g | |
| Content | 10 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 214932 INOX | |
| EAN / GTIN | 4045197674739 | |
| Réf. fabricant | 214932 INOX | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, |
Tableau dapplication
» data-src= ».9/7/9/6/9796af6a-8f9b-48f2-9e9a-71b67515869c/ap60_at_fra_inox-kl900n.png » alt= »INOX < 900 N/mm²" ="lazy" />
