Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | DCMW11T302T00815ME KBN05M | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Wide insert B | 9.525 mm | |
| Thickness of the insert S | 3.97 mm | |
| Length of cutting insert L | 11.628 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 11.628 mm | |
| Diameter of the cutting insert d | 9.525 mm | |
| Corner radius R | 0.2 mm | |
| Corner angle | 55 degrees | |
| Rake angle | 5 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | DCMW 11T302 | |
| Attachment hole diameter | 3.97 mm | |
| Machining group | H (hard materials) | |
| Tool application group | KBN05M | |
| Cutting media, manufacturers designation | KBN05M | |
| Coating | MEGACOAT | |
| Grade | KBN05M | |
| Insert thickness T | 3.97 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | DCMW 11T302 | |
| Interface coding for insert according to ISO TS 13399-60 | DC11T3023N | |
| Insert designation | DCMW 11T302 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | M | |
| Machining method | plunging (ESE) | |
| Finishing / roughing assignment | finishing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 5 g | |
| Content | 1 pcs. |
Identification et classification
| Référence article | 265680 ME | |
| EAN / GTIN | 4960664598984 | |
| Réf. fabricant | TBN02115 | |
| Fabricant/personne responsable | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tableau dapplication
» data-src= ».e/a/d/d/eaddf31a-e88a-4ac8-b52b-d2e4fe0a8d2c/ap60_at_fra_hm-55hrc.png » alt= »Acier < 55 HRC" ="lazy" />
