Description
Caractéristiques techniques
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | PNEU 1205 ANER-GL | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | octagonal | |
| Wide insert B | 17.03 mm | |
| Thickness of the insert S | 5.56 mm | |
| Length of cutting insert L | 17.03 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 12.38 mm | |
| Diameter of the cutting insert d | 17.03 mm | |
| Corner radius R | 0 mm | |
| Corner angle | 108 degrees | |
| Rake face chamfer width C | 2.7 mm | |
| Rake face chamfer angle | 17 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | PNEU 1205 ANER-GL | |
| Wiper length radial Lwr | 2.7 mm | |
| Tool material | Carbide | |
| Machining group | S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturers designation | PR1525 | |
| Coating | Megacoat Nano | |
| Grade | PR1525 | |
| Insert thickness T | 5.56 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | PN1205AN3R | |
| Interface coding for insert according to ISO TS 13399-60 | PN1205AN3R | |
| Insert designation | PNEU 1205 ANER-GL | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 8 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | heat-resistant super-alloys (S) | |
| Tolerance Class | E | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Facility for resharpening | non | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 10 pcs. | |
| Weight | 15 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 222822 UNI | |
| EAN / GTIN | 4960664671229 | |
| Réf. fabricant | TLB05060 | |
| Fabricant/personne responsable | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tableau dapplication
» data-src= ».a/b/1/5/ab15e96f-e2e5-4393-a3c7-beef3c08aaee/ap60_at_fra_hm-500n.png » alt= »Acier < 500 N/mm²" ="lazy" />
