Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Manufacturers designation | RDHX 0501 MOTN | |
| Base form | round | |
| Thickness of the insert S | 1.59 mm | |
| Length of cutting insert L | 5 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 5 mm | |
| Height of cutting edge | 1.15 mm | |
| Diameter of the cutting insert d | 5 mm | |
| Corner radius R | 2.5 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | RDHX 0501 MOTN | |
| Attachment hole diameter | 3 mm | |
| Type of chip breaker | MU | |
| Tool material | Carbide | |
| Machining group | S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturers designation | HB7525 | |
| Coating | CVD | |
| Grade | HB7525 | |
| Insert thickness T | 1.59 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | RD0501M03N | |
| Interface coding for insert according to ISO TS 13399-60 | RD0501M03N | |
| Insert designation | RDHX 0501 MOTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | heat-resistant super-alloys (S); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 1 pcs. | |
| Weight | 1 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 212182 ST900 Copier |
