Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | DC.T 11T308 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Insert version | neutral | |
| Corner angle | 55 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | DCMT11T308 | |
| Attachment hole diameter | 4.4 mm | |
| Type of chip breaker | GK | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); P (steel) | |
| Tool application group | HC-P10 | |
| Cutting media, manufacturers designation | PV720 | |
| Coating | Megacoat Nano | |
| Grade | PV720 | |
| Insert thickness T | 3.97 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | DC11T3083N | |
| Interface coding for insert according to ISO TS 13399-60 | DC11T3083N | |
| Insert designation | DCMT11T308 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutting conditions | continuous | |
| Weight | 5 g |
Identification et classification
| Référence article | 260492 PV720 | |
| EAN / GTIN | 4960664726851 | |
| Réf. fabricant | TLD64037 | |
| Fabricant/personne responsable | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tableau dapplication
» data-src= ».a/b/1/5/ab15e96f-e2e5-4393-a3c7-beef3c08aaee/ap60_at_fra_hm-500n.png » alt= »Acier < 500 N/mm²" ="lazy" />
