Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | ISOTURN | |
| Wet maximum | suitable | |
| Manufacturers designation | VNMG 160408-M3M IC6015 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 16.6 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 16.6 mm | |
| Diameter of the cutting insert d | 9.52 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 35 degrees | |
| ISO-Code | VNMG 160408 | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Tool application group | M3M | |
| Coating | CVD | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Chip breaker | yes | |
| Cutting conditions | continuous | |
| Content | 10 pcs. |
Identification et classification
| Référence article | 251851 IC6015 | |
| EAN / GTIN | 7291075307108 | |
| Réf. fabricant | 5560537 |
Tableau dapplication
» data-src= ».9/7/9/6/9796af6a-8f9b-48f2-9e9a-71b67515869c/ap60_at_fra_inox-kl900n.png » alt= »INOX < 900 N/mm²" ="lazy" />
