Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular | |
| Wide insert B | 8.7 mm | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 8.7 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8.7 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of the cutting insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 80 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| ISO-Code | WNMG080408 | |
| Attachment hole diameter | 5.16 mm | |
| Type of chip breaker | PP | |
| Machining group, manufacturer-specific | P05 | |
| Machining group | P (steel) | |
| Cutting media, manufacturers designation | CCX | |
| Coating | CVD | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WNMG080408 | |
| Interface coding for insert according to ISO TS 13399-60 | WNMG080408 | |
| Insert designation | WNMG080408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 6 pcs. | |
| Weight | 17.2 g | |
| Content | 1 pcs. |
Identification et classification
| Référence article | 252014 CCX Copier |
