Description
Caractéristiques techniques
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | KOMET® Abstechmesser HSS-Co5 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Thickness of the insert S | 2.2 mm | |
| Length of cutting insert L | 75 mm | |
| Insert version | neutral | |
| Tool material | HSS | |
| Machining group | P (steel) | |
| Tool application group | ESA | |
| Coating | uncoated | |
| Grade | P25 | |
| Insert thickness T | 2.2 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | A | |
| Interface coding for insert according to ISO TS 13399-60 | A00 | |
| Insert designation | A00 | |
| Type of product | Cutter insert | |
| With ISO code | no | |
| Number of teeth | 1 pcs. | |
| Suitable for material | steel (P) | |
| Machining method | parting off (ESA) | |
| Finishing / roughing assignment | Roughing | |
| Facility for resharpening | oui | |
| Type of fastening | clamping | |
| Chip breaker | no | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Content | 1 pcs. |
Identification et classification
| Référence article | 240014 A00 | |
| EAN / GTIN | 4047109015586 | |
| Réf. fabricant | H10 15010.91 | |
| Fabricant/personne responsable | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 Besigheim, Deutschland, |
Tableau dapplication
» data-src= ».e/a/d/d/eaddf31a-e88a-4ac8-b52b-d2e4fe0a8d2c/ap60_at_fra_hm-55hrc.png » alt= »Acier < 55 HRC" ="lazy" />
