Description
Caractéristiques techniques
| Manufacturers designation | DC.T 11T304 | |
| Base form | rhombic | |
| Insert version | neutral | |
| Length of cutting edge l | 11 mm | |
| Height of cutting edge | 3.97 mm | |
| Diameter of the cutting insert d | 9.525 mm | |
| Corner radius R | 0.4 mm | |
| Corner angle | 55 degrees | |
| Rake angle | 15 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | DCMT 11T304 | |
| Type of chip breaker | SS | |
| Wiper length axial Lwa | 0 mm | |
| Tool material | HT | |
| Machining group | M (stainless steel); P (steel) | |
| Tool application group | P | |
| Cutting media, manufacturers designation | CU7010 | |
| Coating | uncoated | |
| Grade | CU7010 | |
| Interface coding for insert | DC11T3043N | |
| Insert designation | DCMT 11T304 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | finishing | |
| Chip breaker | yes | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 50 g |
Identification et classification
| Référence article | 260359 CU7010 | |
| EAN / GTIN | 4045197669049 | |
| Réf. fabricant | 260359 CU7010 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, |
Tableau dapplication
» data-src= ».a/b/1/5/ab15e96f-e2e5-4393-a3c7-beef3c08aaee/ap60_at_fra_hm-500n.png » alt= »Acier < 500 N/mm²" ="lazy" />
