Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | HOG-YHOT24XN14 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Thickness of the insert S | 24 mm | |
| Length of cutting insert L | 24 mm | |
| Insert version | neutral | |
| Thread type | BSP/G; BSW/WW | |
| Thread profile | full profile V | |
| Turns per inch min. | 14 | |
| Turns per inch max. | 14 | |
| Insert size L | 24 mm | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturers designation | HM TIALN | |
| Coating | TiAlN | |
| Grade | HB7735 | |
| Interface coding for insert | 218078 14 | |
| Interface coding for insert according to ISO TS 13399-60 | 218078 14 | |
| Insert designation | HOG-YHOT24XN14 | |
| Type of product | other cutting insert | |
| Number of teeth | 13 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Machining method | spiral milling (thread milling) (FSC) | |
| Finishing / roughing assignment | roughing | |
| Chip breaker | no | |
| Cutting conditions | continuous | |
| Weight | 7 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 218078 14 | |
| EAN / GTIN | 4045197447678 | |
| Réf. fabricant | 218078 14 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, |
Tableau dapplication
» data-src= ».a/b/1/5/ab15e96f-e2e5-4393-a3c7-beef3c08aaee/ap60_at_fra_hm-500n.png » alt= »Acier < 500 N/mm²" ="lazy" />
