Description
Caractéristiques techniques
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturers designation | SEKT 1204 AFTN | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert B | 12.7 mm | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 12.7 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.7 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of the cutting insert d | 12.7 mm | |
| Corner radius R | 0 mm | |
| Corner chamfer length C | 0 mm | |
| Corner chamfer angle | 45 degrees | |
| Corner chamfer width | 2.83 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 20 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 26 degrees | |
| Cutting conditions | interrupted | |
| ISO-Code | SEKT 1204 AFTN | |
| Tool material | Carbide | |
| Cutting media, manufacturers designation | HB7535 | |
| Coating | coated | |
| Grade | HB7635 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SE1204AF3N | |
| Interface coding for insert according to ISO TS 13399-60 | SE1204AF3N | |
| Insert designation | SEKT 1204 AFTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | K | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 214245 INOX | |
| EAN / GTIN | 4045197302847 | |
| Réf. fabricant | 214245 INOX | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, |
Tableau dapplication
» data-src= ».a/b/1/5/ab15e96f-e2e5-4393-a3c7-beef3c08aaee/ap60_at_fra_hm-500n.png » alt= »Acier < 500 N/mm²" ="lazy" />
