Description
Caractéristiques techniques
| Cooling lubricant | yes | |
| Series | HELISLOT | |
| Manufacturers designation | XNMU 130608PNTN IC810 | |
| Base form | square | |
| Wide insert B | 13 mm | |
| Thickness of the insert S | 6.35 mm | |
| Length of cutting insert L | 13 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 13 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 90 degrees | |
| ISO-Code | XNMU 130608PNTN | |
| Type of chip breaker | PM | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); P (steel) | |
| Tool application group | P20-P40; M20-M30 | |
| Cutting media, manufacturers designation | IC810 | |
| Coating | PVD | |
| Insert thickness T | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XNMU 130608PNTN | |
| Interface coding for insert according to ISO TS 13399-60 | XNMU 130608PNTN | |
| Insert designation | XNMU 130608PNTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 8 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Machining method | slot milling (FNU) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Content | 10 pcs. | |
| Correction factor fz | 1.5 |
Identification et classification
| Référence article | 227746 GGG | |
| EAN / GTIN | 7291075311280 | |
| Réf. fabricant | 5607636 |
Tableau dapplication
» data-src= ».2/8/d/d/28dd2523-4663-40c9-83c8-b23cce703c79/ap60_at_fra_gg.png » alt= »GG » = »lazy » />
